Pedestal Rock Breaker Boom System: What It Can Do

Pedestal Rock Breaker Boom System: What It Can Do

A pedestal rock breaker boom system is designed to assist in managing oversize materials at mining, quarrying, and aggregate processing sites. This system works in coordination with primary crushers, conveyors, and material handling equipment to ensure controlled breaking of rocks and stable material flow.

1. Handle Oversize Rocks at the Crusher Inlet

This system is positioned near the primary crusher to break rocks that cannot pass through the crusher opening.

It allows operators to:

Break oversize boulders before they enter the crusher

Reduce the size of irregular or tightly lodged materials

Clear bridging or blockages at the crusher mouth

This helps maintain normal feeding conditions for the crusher.

2. Perform Controlled and Targeted Breaking

The boom and hammer can reach specific points where manual breaking is not practical.

It enables:

Accurate positioning of the hammer over a selected impact point

Breaking of material that accumulates around the feed hopper

Crushing of rocks that may cause uneven flow or stoppage

Operators can carry out breaking work continuously or intermittently based on site conditions.

3. Support Remote Operation and Safe Work Distance

This system is commonly equipped with a remote console or radio remote control.

Through these controls, the operator can:

Manage boom movements and hammer strikes from a safe location

Adjust reach, angle, and working position based on material conditions

Observe and control operations without approaching hazardous areas

This contributes to safer working procedures during material breaking.

4. Integrate with Different Types of Crushers

A pedestal rock breaker boom system can be adapted for use with:

Jaw crushers

Gyratory crushers

Hopper

Grizzly screen

Mobile crushing stations

It can be configured with different boom lengths, hammer models, and pedestal structures to suit the layout of specific plants.

5. Maintain Continuous Material Flow

By clearing blockages and reducing oversize rocks, this system helps maintain stable material movement.

It allows the production line to:

Resume feeding after a blockage

Avoid sudden interruptions

Keep material flowing into downstream equipment

This supports the overall continuity of site operations.

6. Work in Harsh and High-Duty Environments

The system can operate in conditions where direct manual labor is limited or impossible.

It is commonly used in:

Surface mines

Underground mines

Aggregate quarries

Metallurgical plants

Recycling yards

It performs breaking work in places with restricted access, heavy dust, or high vibration levels.

7. Reduce Manual Handling of Large Rocks

Instead of workers manually breaking or moving oversize stones, the boom system carries out these tasks mechanically.

It can:

Replace high-risk manual breaking near crushers

Minimize human exposure to falling rock and flyrock

Allow operators to manage material from a protected location

This aligns with common industrial safety procedures.

8. Provide Continuous or On-Demand Operation

Depending on the site's workflow, the system can be used:

Continuously during peak feeding periods

Occasionally for clearing blockages

As a standby tool for emergency material reduction

It functions as part of the site's regular operating equipment.

By operating alongside the primary crusher and other processing equipment, pedestal rock breaker boom system completes the necessary breaking work and supports the overall efficiency of the material handling process.

Tags: pedestal boom system, rock breaker system, pedestal rock breaker